Lihlahisoa
Ho bonolo ho sebetsa setshelo rabara-taere gantry crane bakeng sa boema-kepe
Tlhaloso
E etselitsoe bokhoni bo ke keng ba lekanngoa le ho tenyetseha, crane ea gantry e entsoeng ka Rubber-tyred e fana ka tharollo e fapaneng le e ka tšeptjoang bakeng sa ho phahamisa le ho tsamaisa meroalo e boima.Ka lithaere tsa rabara tse tšoarellang, crane e ka sebetsa ka hare le ka ntle ntle le tlhokahalo ea lisebelisoa tse eketsehileng le ho fokotsa nako.Hore na o mosebetsing oa kaho, oa ho etsa thepa kapa oa thepa, li-gantry crane tse kentsoeng ka rabara ke khetho e nepahetseng ea ho tsamaisa tšebetso le ho holisa tlhahiso.
Li-cranes tsa gantry tse entsoeng ka rabara li na le mohaho o tiileng le theknoloji e tsoetseng pele e etselitsoeng ho fana ka bokhoni bo phahameng ba ho phahamisa.Ka matla a ho phahamisa a ho fihla ho lithane tse 350, crane ena e khona ho jara le meroalo e boima ka ho fetisisa habonolo.Litaolo tsa eona tse nepahetseng li netefatsa motsamao o bonolo, o nepahetseng, o lumella opareitara hore a tsamaise habonolo le ho tsamaisa libakeng tse thata.Crane e na le sistimi e tšepahalang ea ho tiisa mariki e netefatsang polokeho e nepahetseng nakong ea ts'ebetso, e fokotsang kotsi ea likotsi le ho netefatsa boiketlo ba basebetsi.
Qetellong, li-cranes tsa gantry tse entsoeng ka rabara li fana ka tharollo e phethahetseng le e tsoetseng pele bakeng sa litlhoko tsa hau tsa ho sebetsana le thepa.Kaho ea eona e tiileng, matla a ho phahamisa a ikhethang le likarolo tse tsoetseng pele tsa othomathike li e etsa hore e be e loketseng liindasteri ho tloha ho tsa kaho ho isa ho tsa thepa.Ka ho sisinyeha ha eona le ho feto-fetoha ha maemo, crane e netefatsa ts'ebetso ea ka hare le ka ntle ntle le tlhoko ea lisebelisoa tse eketsehileng.Ho tsetela ho crane e kolobisitsoeng ka rabara ho ka eketsa tlhahiso ea hau, ea tsamaisa tšebetso ea hau, 'me ea isa khoebo ea hau holimo.
E 'ngoe ea melemo e ka sehloohong ea li-cranes tse entsoeng ka rabara ke ho tsamaea ha tsona.Crane ena e na le lithaere tsa rabara tse entsoeng ka tsela e khethehileng tse fanang ka ho hohela hamonate libakeng tse fapaneng.Sena se felisa tlhoko ea ho kenya pina e jang chelete e ngata le e jang nako, kaha crane e khona ho tsamaisa sebaka sa hau habonolo.Hore na o hloka ho tsamaisa mechini e boima, lijana kapa lisebelisoa tse ling tse ngata, crane ena e fana ka maemo a bonolo a ho tsamaisa meroalo ho tloha sebakeng se seng ho ea ho se seng.
Li-gantry cranes tse entsoeng ka rabara li boetse li ithorisa ka likarolo tse tsoetseng pele tsa boiketsetso tse eketsang katleho ea tsona le tlhahiso.Ka mekhoa e hlophisehileng le bokhoni ba taolo e hole, basebelisi ba ka nolofatsa ts'ebetso ka ho ntlafatsa phallo ea mosebetsi le ho fokotsa mosebetsi oa matsoho.Litsamaiso tse bohlale tsa crane li thusa ho beha maemo ka nepo le taolo ea mesebetsi e latellanang, ho netefatsa hore ts'ebetso e 'ngoe le e 'ngoe e etsoa ntle le moroallo.Ho feta moo, sebopeho sa eona se bonolo sa mosebelisi le tlhahlobo ea nako ea nnete e thusa basebelisi ho lekola lintlha tsa ts'ebetso le ho lemoha kapele mathata leha e le afe a ka bang teng, ho fokotsa nako le ho eketsa nako.
| Tlhaloso e ka Sehloohong | ||
|---|---|---|
| Matla | 30.5 ho isa ho 350 | ton |
| Sekhahla | 18 ho isa ho 50 | m |
| Boemo ba ho sebetsa | A6 | - |
| Mocheso o sebetsang | - ho tloha ho 20 ho isa ho 40 | ℃ |
Tekheniki Parameters
| Mekhahlelo ea Rubber Tyred Gantry Crane | ||
|---|---|---|
| Ntho | Yuniti | Sephetho |
| Bokhoni ba ho phahamisa | ton | 30.5-350 |
| Bophahamo ba ho phahamisa | m | 15-18 |
| Span | m | 18-50 |
| Mocheso oa tikoloho ea mosebetsi | °C | - 20-40 |
| Hoisting lebelo | m/m | 12-36 |
| Lebelo la trolley | m/m | 60-70 |
| Sistimi e sebetsang | A6 | |
| Mohloli oa matla | Mekhahlelo e meraro A C 50HZ 380V | |
Lintlha tsa Sehlahisoa
01
Beam e ka sehloohong
—-
1.ka mofuta oa lebokose le matla le standardcamber
2.Ho tla ba le platein e matlafatsang ka har'a girder e kholo
02
Crane Trolley
—-
1.High ho sebetsa mosebetsi hoist mochine.
2.Mosebetsi oa ho sebetsa: A6-A8
3.Bokhoni: 40.5-70t.
03
Sefaha sa setshelo
—-
Sebopeho se utloahalang, molemo ka ho fetisisa, bokhoni bo matla ba ho jara, 'me bo ka sebetsoa le ho etsoa ka mokhoa o ikhethileng
04
Moropa oa Cable
—-
1.Bophahamo ha bo fete 2000 metres.
2. Sehlopha sa tšireletso sa lebokose la mokelli ke lP54.
05
Kamore ea Crane
—-
1.Koala le ho bula mofuta.
2.Air-conditioning e fanoe.
3.Interlocked circuit breakerprovided.
06
Mochini oa ho Tsamaea oa Crane
—-
1.Material: ZG55, ZG65, ZG50SiMn kopo ea oron
2. lebili bophara: 250mm-800mm.
Mosebetsi o Motle
Tlase
Lerata
Hantle
Mosebetsi oa matsoho
Letheba
Morekisi
E kgabane
Lintho tse bonahalang
Boleng
Tiisetso
Ka mor'a Thekiso
Tshebeletso
HYCrane VS Ba bang
Mofuta o mong:
1. Ts'ebetso ea ho reka thepa e tala e thata ebile e hlahlobiloe ke bahlahlobi ba boleng.
2. Lisebelisoa tse sebelisoang ke lihlahisoa tsohle tsa tšepe tse tsoang lihlahisoa tse kholo tsa tšepe, 'me boleng bo tiisitsoe.
3. Khoutu ka thata ho inventory.
Mofuta o mong:
1. Khaola likhutlo, tse kang: qalong e ne e sebelisoa 8mm tšepe poleiti, empa e sebelisoa 6mm bakeng sa bareki.
2. Joalokaha ho bontšitsoe setšoantšong, lisebelisoa tsa khale li atisa ho sebelisoa bakeng sa ho nchafatsa.
3. Ho reka litšepe tse sa tloaelehang ho bahlahisi ba banyenyane, boleng ba sehlahisoa ha bo tsitsa, 'me likotsi tsa ts'ireletso li phahame.
Mofuta oa rona:
1. Motor reducer le brake ke tse tharo-in-one sebopeho
2. Lerata le tlaase, ts'ebetso e tsitsitseng le litšenyehelo tse tlaase tsa tlhokomelo.
3. Ketane e hahelletsoeng ka har'a mochini o thibelang marotholi e ka thibela liboutu tsa enjene hore li se ke tsa lokoloha, 'me tsa qoba kotsi ho' mele oa motho e bakoang ke ho oa ka phoso ha koloi, e leng ho eketsang polokeho ea lisebelisoa.
Mofuta o mong:
1.Li-motor tsa mofuta oa khale: Hoa lerata, ho bonolo ho apara, bophelo bo khutšoanyane ba tšebeletso, le litšenyehelo tse phahameng tsa tlhokomelo.
2. Theko e tlaase 'me boleng bo bobe haholo.
Mofuta oa rona:
Mabili kaofela a tšeloa mocheso 'me a fetotsoe,' me bokaholimo bo tlotsoa ka oli e thibelang mafome ho eketsa botle bo botle.
Mofuta o mong:
1. Se ke oa sebelisa splash fire modulation, ho bonolo ho rusa.
2. Bokhoni ba ho jara bo bobe le bophelo bo bokhutšoanyane ba tšebeletso.
3. Theko e tlaase.
Mofuta oa rona:
1. Ho amohela li-inverters tsa Japanese Yaskawa kapa tsa Jeremane Schneider ha li etse feela hore crane e tsamaee e tsitsitse ebile e sireletsehile, empa hape le ts'ebetso ea alamo ea phoso ea inverter e etsa hore tlhokomelo ea crane e be bonolo le e bohlale haholoanyane.
2. Ts'ebetso ea ho inverter ea inverter e lumella motlakase hore o iketsetse matla a eona ho ea ka mojaro oa ntho e phahamisitsoeng ka nako leha e le efe, e seng feela e eketsang bophelo ba tšebeletso ea motlakase, empa hape e boloka tšebeliso ea matla a motlakase. thepa, ka tsela eo ho pholosa feme Litšenyehelo tsa motlakase.
Mofuta o mong:
1.Mokhoa oa ho laola oa "contactor" o tloaelehileng o lumella crane ho fihlela matla a maholo ka mor'a hore e qale, e leng se etsang hore sebopeho sohle sa crane se sisinyehe ho isa tekanyong e itseng nakong ea ho qala, empa butle-butle e lahleheloa ke tšebeletso. bophelo ba motlakase.
Lipalangoang
PAKA LE PELO NAKO
Re na le sistimi e felletseng ea ts'ireletso ea tlhahiso le basebetsi ba nang le boiphihlelo ho netefatsa ho fana ka nako kapa kapele.
PATLISISO TS'ELISO
Matla a setsebi.
MOTSAMAI
Matla a fektheri.
HLAHISO
Lilemo tsa boiphihlelo.
TUMELO
Letheba le lekane.
Asia
10-15 matsatsi
Bochabela bohareng
15-25 matsatsi
Afrika
30-40 matsatsi
Europe
30-40 matsatsi
Amerika
30-35 matsatsi
Ka Seteishene sa Naha se romellang kantle lebokose la plywood le tloaelehileng, palletor ea lehong ka 20ft & 40ft Container.Or ho latela litlhoko tsa hau.
